Last Years Alcohol Ink Ornaments

Here's a post from last years ornaments.
Just another way to do the inks. 

I love the versatility of alcohol inks. 
 This Christmas I put them to the test by making some ornaments with them.

Having bought basic ornaments from Michael's I started with masking fluid which I applied with my ink pen in various shapes and forms.










 

After the masking fluid dried, almost immediately, I was ready to add the alcohol inks. You might notice that I reuse my the ink in my palettes - just add rubbing alcohol and they're ready to go. (I hate wasting paint.)

After removing all the masking fluid with my eraser, I was ready to spray on the clear Acrylic Spray Finish. I did this outside at arms length and found some of the paint smearing together. Probably better to spray at a distance (as  the directions state). After allowing these to dry 15 or more minutes I went back in with a fine permanent marker to outline some of the detail which had been lost in the spraying. As long as the finish was totally dry there was no smearing.

After adding some silver ribbon they were ready to go. I took them to the Holiday Art Show and found them to be a big hit.  I still have a few left which I will use as hostess gifts and possibly a give away on this blog. What do you think? Would like to see them as a giveaway?

Alcohol Ink Bulbs

This year I'm stamping my bulbs with alcohol inks.

I start with regular glass bulbs and pour white acrylic craft paint inside of it. I put them upside down in a cupcake pan so the excess paint can run out of it. (Remember to use the paper liners to make clean up easy.)






        The paint takes about a day to dry.

 

Stamps can be purchased in the store but I make my own stamps by attaching Velcro to round cylinders. Use the hard side of the Velcro. I found a pack of 6 containers for mixing glitter in at Michael's for $2. A wine cork or medicine bottle will do just as well. I cut small squares out of white felt.

 

 Put just a few drops of two or three colors on the stamp then begin stamping. (Here I'm using two oranges and a blue.)

 Cover the bulb with the inks. You can continue stamping until you like the effect. If you don't like the look you can always clean it off with 91% rubbing alcohol but you might want to try dripping some alcohol on the bulb first to see what interesting shapes it will make. Try dripping some colors on it first. 

There is a big variety of shaped bulbs in the stores to choose from. 


After letting the bulbs dry completely (it doesn't take but a few minutes), you will want to seal them. This can be tricky because  the sealants will melt the paint. I used the Krylon, Clear Polyurethane. Carefully spray your bulb with a light coat at first. Make sure you are spraying from a distance. After the first coat is dry repeat again with a slightly heavier coat. Let that dry and repeat for a third coat. Or you can try the Liquitex Gloss Varnish which is applied with a soft brush and again a very light top coat. (I used this for my plates and offer it as an alternative to spraying. I think the spraying may work better on the bulbs.)

 This bulb got a little too close to the spray but the effect is still nice as long as it doesn't melt too much.

Tomorrow I'll post some alcohol inks I painted last year. They were painted with the alcohol inks also, but with a different technique.

Alcohol Ink Christmas Bulbs

Here's a post from last years ornaments.
Just another way to do the inks. 

I love the versatility of alcohol inks. 
 This Christmas I put them to the test by making some ornaments with them.

Having bought basic ornaments from Michael's I started with masking fluid which I applied with my ink pen in various shapes and forms.










 

After the masking fluid dried, almost immediately, I was ready to add the alcohol inks. You might notice that I reuse my the ink in my palettes - just add rubbing alcohol and they're ready to go. (I hate wasting paint.)

After removing all the masking fluid with my eraser, I was ready to spray on the clear Acrylic Spray Finish. I did this outside at arms length and found some of the paint smearing together. Probably better to spray at a distance (as  the directions state). After allowing these to dry 15 or more minutes I went back in with a fine permanent marker to outline some of the detail which had been lost in the spraying. As long as the finish was totally dry there was no smearing.

After adding some silver ribbon they were ready to go. I took them to the Holiday Art Show and found them to be a big hit.  I still have a few left which I will use as hostess gifts and possibly a give away on this blog. What do you think? Would like to see them as a giveaway?